1Zpresso X-Pro

The 1Zpresso X-Pro might be the most versatile hand grinder I've ever used. It handles espresso, pour-over, and French press with equal competence, which is something most hand grinders at any price fail to do. I've been using mine daily for about a year, and it's become the grinder I reach for most often, even over my electric grinder.

If you're considering the X-Pro, or deciding between it and other models in the 1Zpresso lineup, I'll cover the build quality, grind performance across brew methods, the adjustment mechanism, and where it fits in the broader market of premium hand grinders.

Build and Construction

The X-Pro uses a CNC-machined aluminum body with a polished silver finish. Pick it up, and you immediately feel the weight. At about 730 grams (roughly 1.6 pounds), it's heavier than most hand grinders, and that weight translates directly into stability while grinding.

The handle attaches to a bearing-supported axle that spins smoothly with minimal wobble. This is where 1Zpresso's engineering shows. Cheaper hand grinders have axle play that creates uneven grinding because the inner burr shifts during rotation. The X-Pro's tight tolerances eliminate that.

The Burr Set

The X-Pro uses 1Zpresso's 48mm stainless steel conical burrs. These are larger than what you'll find in most hand grinders (the Comandante C40 uses 39mm burrs, the Kinu M47 uses 47mm). Larger burrs grind faster because more bean contacts the cutting surface per revolution.

In practical terms, I grind 18 grams of light roast coffee for espresso in about 30 seconds. For a 25-gram pour-over dose, it takes about 40 seconds. These are fast times for a hand grinder, and the effort is moderate. My wrist doesn't fatigue during a single session.

Capacity

The grounds catch cup holds about 30 grams, which covers a single dose for any brew method. If you're grinding for two espresso shots or a large French press, you'll need to grind in two batches. The bean intake funnel on top is wide enough to pour beans in without spilling.

The Adjustment System

This is the X-Pro's standout feature. It uses an external numbered dial on the bottom of the grinder body. Each full rotation has 50 clicks, with each click being 12.5 microns of burr adjustment.

Why This Matters

Most hand grinders adjust by removing the handle, lifting the inner burr assembly, and turning a ring or nut underneath. This means you need to reassemble and test to see if you're at the right setting. The X-Pro's external dial lets you adjust grind size without disassembly. Just turn the dial, and you're done.

I keep my espresso setting at about 60 clicks from fully closed. My pour-over setting lives at 95 clicks. Switching between them takes 3 seconds. On my old Comandante, switching between espresso and filter meant unscrewing the cap, removing the handle, counting red dots, and hoping I landed in the right range. The X-Pro's system is just better.

Dial Accuracy

The clicks are precise and consistent. When I return to the same number, the grind output is repeatable. I verified this by grinding at my espresso setting, switching to pour-over, and then returning to espresso. Shot times on my Breville Dual Boiler came within 1 second of each other before and after the switch. That's excellent repeatability.

Grind Quality by Brew Method

Espresso

The X-Pro produces a grind fine enough for proper espresso extraction. I've pulled shots on a Breville Dual Boiler, a Flair 58, and a Cafelat Robot, and the results are consistently good. The flavor profile is clean with solid clarity, which is characteristic of well-made conical burrs.

One thing I've noticed: the X-Pro doesn't quite match flat burr electric grinders for flavor separation. If you're used to a Niche Zero or DF64, the X-Pro will taste slightly more blended. But compared to other hand grinders at this price, the espresso quality is top-tier.

Pour-Over

Pour-over is where the X-Pro might perform best. The grind consistency at medium settings is very good, and V60 drawdown times are predictable and repeatable. I use the X-Pro for all my pour-over brewing now, even though I have an electric grinder available.

The flavor in the cup is sweet, clean, and balanced. Light roast single-origins come through with clear acidity and distinct origin character.

French Press and Cold Brew

At coarse settings, the X-Pro produces uniform particles with very few fines. French press coffee is clean with minimal silt, which is noticeably better than what I get from most electric burr grinders at the coarse end of their range.

For a broader look at 1Zpresso's full lineup, check our Best 1zpresso Grinder roundup.

X-Pro vs. Other 1Zpresso Models

The 1Zpresso lineup has a lot of options, and they overlap in confusing ways. Here's how the X-Pro compares to the most popular alternatives.

X-Pro vs. JX-Pro

The JX-Pro costs about $60 less and uses the same size burrs (48mm) but a different burr geometry. The X-Pro has finer adjustment resolution (12.5 microns vs. 25 microns per click) and the external adjustment dial. For espresso, the X-Pro's finer steps make dialing in easier. For filter-only brewing, the JX-Pro is perfectly adequate and a better value.

X-Pro vs. J-Max

The J-Max is 1Zpresso's espresso-focused model with an even finer adjustment (8.8 microns per click). If you brew espresso exclusively, the J-Max gives you more precise control. But it's slower and stiffer at coarse settings, making it less versatile for filter methods. The X-Pro is the better all-rounder.

X-Pro vs. Q2

The Q2 is 1Zpresso's travel grinder at about one-third the price. It's smaller, lighter, and uses 38mm burrs. Grind quality is good for the size but noticeably below the X-Pro. The Q2 is great for travel, but it's not a daily driver replacement.

Cleaning and Maintenance

The X-Pro is simple to maintain. The inner burr assembly lifts straight out after removing the top cap. I brush the burrs with a small bristle brush once a week and do a full disassembly clean once a month.

Retained grounds between sessions are minimal. About 0.1 to 0.2 grams stay in the grinding path, which is excellent for a conical grinder. If you're single-dosing (and you should be with a hand grinder), this retention is negligible.

The burrs should last 5+ years of daily home use before needing replacement. 1Zpresso sells replacement burr sets on their website for about $25 to $35, which is very reasonable.

One maintenance note: occasionally apply a tiny drop of food-safe lubricant to the axle bearing. This keeps the handle spinning smoothly. I do this every 3 to 4 months.

FAQ

Is the 1Zpresso X-Pro worth the price?

At around $200, it's a significant investment for a hand grinder. But the build quality, grind performance, and adjustment system are genuinely superior to anything at the $100 price point. If you brew both espresso and filter coffee, the X-Pro's versatility and quick switching make it worth the premium. If you only brew filter, the JX or JX-Pro at $100 to $140 gives you 90% of the quality for much less. Our Best Coffee Grinder guide covers both hand and electric options if you want to compare.

How long does it take to grind with the 1Zpresso X-Pro?

For espresso (18g, fine grind): about 30 seconds. For pour-over (25g, medium grind): about 35 to 40 seconds. For French press (30g, coarse grind): about 25 to 30 seconds. These times are for light to medium roast beans. Dark roasts grind faster because they're softer and more brittle.

Can the 1Zpresso X-Pro grind fine enough for Turkish coffee?

It can get very fine, but I don't think it reaches true Turkish-coffee fineness (which needs to be almost powder-like). For Turkish, you'd want the 1Zpresso K-series or a dedicated Turkish hand grinder. The X-Pro's finest setting is better suited to espresso.

Does the 1Zpresso X-Pro come with a case?

Yes, it includes a padded carrying case that fits the grinder, handle, and a small brush. The case is decent quality and works well for travel, though the grinder itself is a bit heavy for backpacking or ultralight travel.

The Verdict

The 1Zpresso X-Pro is a premium hand grinder that actually earns its price tag. The external adjustment dial, fast grinding speed, and consistent output across all brew methods make it one of the most practical hand grinders you can buy. If you want one grinder that handles everything from espresso to cold brew without compromise, the X-Pro delivers. Just be prepared for the upfront cost and the daily arm workout.